Intended use

Bathroom furniture from PELIPAL and their technical fittings are manufactured for use in non-commercial bathrooms for storing conventional bathroom accessories. They are intended solely for this purpose. Any other use is considered improper and can result in property damage or even to personal injuries. Parents must ensure their children never use the bathroom unsupervised and do not use it to lay in, as the use of electrical appliances, water and mobile furnishings may result in property damage or even personal injury. Particularly considered improper use:

• overfilling and overloading the furniture and washbasins

• sitting, climbing and standing on the furniture and the washbasins

• attaching equipment (in particular electrical appliances) made by other manufacturers.

No liability will be accepted for damages caused by improper use.

Hazard warnings

1. The assembly and disassembly of furniture and furniture parts must only be carried out by an authorised, specialist company.

2. All furniture parts with electrical installations must only be connected by a qualified electrician, in consideration of DIN 57 100/VDE 0100, Part 701.

3. Persons must never hang on the doors, pull-outs or drawers.

4th When hanging and unhanging the doors, pull-outs and drawers, these must always be well supported from below so that they do not fall.

5. Allow light sources to cool before changing.

6. Do not press too hard on light sources. They may otherwise shatter into sharp glass shards.

7. Only touch halogen lamps with a clean, grease-free cloth.

8. Do not grip the socket (caution: electric shock!).

9. Protect furniture with electrical installations from splashing water.

10. Only pull the plug connector from the socket using counter-pressure.

11. Only open doors as far as the stop, and do not overstretch.

12. Do not place objects on the E-box (switch/socket module).

13. Protect children from stored medications and cleaning products.

Real wood
Each piece of wood is unique. Colour variations depend on the structure and the area where the wood is grown. Likewise with the age of the furniture, as the shade of the surface changes under natural environmental influences (e.g.: daylight). Absolutely even colour is not possible.

MDF film, deep-drawn
Medium-density fibreboard with PVC or PET film, thermoplastically 3-dimensionally coated, melamine rear, CPL or PP-film coated.

Varnished MDF
Medium density fibreboard coated with multiple layers of varnish on the surface and edges, coated with melamine or varnished in matching matt colours on the back.

Chipboard ABS/PP edges
Chipboard coated on both sides with ABS or PP edges.

Chipboard glass
Chipboard coated on both sides combined with a varnished or digital printed floating glass/optiwhite glass plate, rear melamine-coated.

Varnish laminate
Medium density fibreboard with PET film and a coating system as surface finish.

We recommend using a clean, soft, damp cloth to gently clean wooden fronts, plastic front panels and varnished front panels as well as bodies. Particularly stubborn stains can be removed with warm soapy water without leaving any residue. Then polish the surfaces dry. Stains should generally be removed immediately. As a general rule, cleaning products containing alcoholic substances should not be used on acrylic front panels.

Cleaning the mirror and glass surfaces
We recommend using a clean, soft, dry cloth to clean mirrors and glass surfaces. Stubborn stains, such as grease, cosmetics residue, etc., should be removed immediately and then wiped with soapy water and a chamois leather. Please ensure no drip residues remain on the edges and behind the mirror. Glass cleaners are not suitable for cleaning mirrors!

Care instructions for mineral marble washbasins
A clean, soft, damp cloth (not a microfibre cloth!) is all that is needed for cleaning. For heavy soiling, please use a mild liquid cleaner (without alcohol and scouring), e.g. vinegar-based cleaner and warm water. Please ensure the water temperature does not exceed 65°C. Spilled substances should be removed immediately. Problem stains can be removed with nail polish remover. To maintain the gloss of the mineral cast surface, we recommend applying high-quality car polish from time to time and repolishing, e.g. SONAX Xtreme Polish & Wax. Do not use drain cleaner with sodium hydroxide.

Temperature stress
The quality-inspected mineral marble washbasin has been tested in endurance tests (water temperature thermal shock from 10°C to 65°C) and meets the requirements of DIN 14688. You should not let water over 65°C flow into the basin for extended periods.

Hair dyes/washing laundry:
Be careful when using hair dyes. Some agents are so aggressive that traces cannot be removed. Doing laundry in the basin is not recommended, as the colours from the clothing may settle and permanently damage the basin. This may also lead to scratches caused by buttons and zips.

Important!
The mineral marble washbasin must be mounted on a washbasin base cupboard. Irregularities in the lower, inconspicuous area (after assembly is completed) is due to the nature of production and the material itself and does not justify a complaint.

Damages
Improper use of abrasive cleaners, exposure to sharp, scratching or abrasive objects, or prolonged exposure to dyes may damage the surface (gel coat). These scratches or dye marks can be corrected in a manner similar to car maintenance. This means that these marks can easily be removed using a conventional polish (M 100) and polishing wool. In the event of substantial damage, the area should first be prepared with a wet abrasive (from course to fine!) Cigarettes left on the washbasin for prolonged periods can yellow the gel coat. This yellowing is superficial and can also be removed using the same technique.

Care instructions for glass washbasins:
Since our glass washbasins have smooth surfaces, they are very easy to clean. For everyday care, simply wipe with a damp cloth and appropriate glass cleaners. Then wipe with a dry, lint-free cloth. Never clean the washbasin with an abrasive cleaning agent or with the abrasive side of sponges, as this will damage the surface. Glass is sensitive to high thermal stress, so never place frozen drinks or hot dishes and pots on it. The resulting material stress may cause the glass to break.

Care instructions for ceramic washbasins
To remove lime we recommend using an acidic cleaner (pH 1-4), for example, vinegar-based cleaner. Acetic acid not only removes limescale, it is also easily biodegradable. The harder the water, the more cleaning agent should be used. We recommend using a detergent-based cleaner to stains caused by grease. Mould stains can be removed with chlorine-based, alkaline bathroom cleaners. Please be sure to follow the manufacturer's instructions.

Care instructions for Krion washbasins
The semi-gloss surface of the Krion washbasin is easy to clean. Use circular motions for optimal results and spread detergents e.g. scouring agents (e.g. Viss, Vif) over the entire area. To keep the surface smooth it should be cleaned every day using a damp cloth. For daily cleaning, use a damp cloth and a soft detergent on any spots. Wipe down with a damp cloth and dry the surface with a towel. For stubborn stains and dirt, apply a soft cleanser with micro particles (e.g. Viss, Biff) with a damp sponge (e.g. a Scotch Brite) and rub in using circular motions. Repeat the process and finally clean the surface next to the stains for a uniform, smooth result. Wipe down with a damp cloth and dry the surface with a towel.

To ensure a long life for your bathroom furniture, washstand, mirror or mirror cupboard, please note the following information for daily use:

1. Ensure that there is sufficient ventilation and drying in the bathroom, especially after taking a bath or shower. If walls are continuously damp, there is a risk of mould, mildew and property damage.

2. Avoid long-lasting exposure to water. Standing and overflowing water on the surface of the bathroom furniture and the washbasin must be removed immediately.

3. If the bathroom furniture connects directly to the bath or shower area, a shower enclosure must be installed.

4th Protect the premium high-quality furniture and mineral cast surfaces, as well as mirror and glass surfaces, from extreme light exposure as well as from heavy, sharp-edged, abrasive and hot, corrosive and acidic objects. The result would be unsightly discolouration, pressure marks, scum or scratches. Slight colour variations over time are unavoidable in all materials.

5. Used towels must not be hung from the furniture doors, due to the moisture and weight.

6. Remove any staining as soon as possible with a soft, damp cloth and lukewarm water. Often, no detergents are required. Then rub dry.

7. Spilled aggressive substances must be removed immediately. Do not allow to penetrate!

8. Do not use any aggressive cleaning agents containing alcohol or scouring agent, or microfibre cloths (except Krion washbasins!)

9. Do not store open WC and drain cleaners, nail polish remover etc. in the furniture or the mirror cabinet.

10. The water temperature on the mineral cast surface must not exceed 65° C.

One highlight, and we mean this in the truest sense of the term, is the smart lighting control. "LEDrelax" is being introduced, with numerous features ranging from functional lighting to emotional colour design. The whole concept is controlled by remote control or via an app. If you have any queries regarding installation or the operating instructions, please follow this link:

https://www.eglo.com/connect/Support

Here we present the S10 mirror cabinet series, where the colour temperature of the lights can be adjusted threefold.

All the chipboard and MDF boards that we use are environmentally friendly and meet the requirements of DIN 6 (plastic-coated decorative flat pressed boards) and EN DIN 120 for emission class E1, and are significantly below the limit of 0.1 ppm (= 0.12 mg formaldehyde per m3/g air) permitted by the German Federal Health Office.

High comfort thanks to the use of the new CLIP top BLUMOTION hinge by Blum® guarantees doors close absolutely silently.

Innovative and elegant
The Hettich frame features a timeless yet trendy design with clean and square contours.
• Easy to install
• Lateral cover adjustment
• Rail retrofittable

Carcass
Body quality in various colour combinations or décors, material thickness 16mm

Back walls:
The backs of the bodies are set inward so that enough space remains between them and the wall to allow the necessary circulation.

Hinges
The all-metal quick-install hinges open 107°. They are marked by their ease of installation and allow easy alignment of the fronts. The clothes baskets have special shears that lock automatically when opening.

Door dampers
A progressive door damper which guarantees the door will close especially quietly is built into the hinge.

Shelves
Our furniture includes with high-quality glass shelves. The washbasin base cupboard features one shelf in the body décor.

Mount
We use a three-dimensionally adjustable, easy-to install suspension fitting. It is pegged into the sides of the body in such a way that each fitting is guaranteed to withstand a constant load. The shelf support is invisible, yet adjustable.

Washbasins
We offer a large selection from reputable and proven manufacturers:

- Ceramic washbasins
- Seamlessly cast mineral marble washstands with polished surface
- Glass washbasins
- Krion washbasins

Accessories
A very extensive range of accessories, which can be integrated into every individually planned bathroom, meets even the most demanding customers’ standards. All chipboard and MDF boards that we use are environmentally friendly and meet the requirements of DIN 6 (plastic-coated decorative flat pressed boards) and EN DIN 120 for emission class E1, and are significantly below the limit of 0.1 ppm (= 0.12 mg formaldehyde per m3/g air) permitted by the Federal Health Office.